KUEN CHIN ESSENCE MACHINE CO.,TLD.

Special Features：　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　DOWNLOAD▼
（1）The measurement elements including:main meter,bypass meter and changeover valve.("3 in 1"concept)
（2）There are four diameters:DN50,65,80and100.
（3）The main meter and bypass meter are arranged in straight as the water flowing direction,so the installation space do not need
　　　too much.
（4）The impeller of the m

Compound Water Meter

ain meter is designed to according to the hydrodynamic.
（5）Bypass meter is as a measuring carriage.
（6）Adopting the spring-loaded changeover valve with low pressure lose.
（7）For convenience reading, the register of main meter can be turned in 300°.
（8）She is provided with going upstream or against the current; for preventing the backflow of the external pipe or the pressure
　　 of outlet is higher then flow backward, letting the accumulation volume of register reversed

Applications：
（1）The measuring ranges are wide,suitable for the place of big flowerate difference.
（2）The starting flowrate(10L/H) is small,so she is easy to detect the pipe behind the meterwhether is leak or not.
（3）She is lighter and need less installation space than the traditional type, besides alsocan add an adjustable pipe before
　　 the meter for suiting the original length of meter.
Installation Requirements：
（1）Installed by horizontal or vertical.
（2）Working temperature:A.0~45℃ B.0~120℃.

Performance：

Type	Working temperature PN Kgf/cm 2	Max. peak flow Q max m 3 /h	Continuous flow		Change over with Q c		Transitional flowrate ± 2% Q t m 3 /h	Min. flowrate ± 5% Q min m 3 /h
Type	Working temperature PN Kgf/cm 2	Max. peak flow Q max m 3 /h	Q n m 3 /h	Q n m 3 /h	Increasing m 3 /h	Decreasing m 3 /h	Transitional flowrate ± 2% Q t m 3 /h	Min. flowrate ± 5% Q min m 3 /h
KC -65C	17.5	90	50	2.5	2.3	1.2	0.0375	0.02
KC -65C		120	70	2.5	2.3	1.2	0.0375	0.02
KC -80C		200	120	2.5	2.3	1.2	0.0375	0.02
KC -100C		280	180	2.5	2.3	1.2	0.0375	0.02

Dimensions and Weights：

Type	Length (mm) L	Height			Width	Weight	Remark
		H mm	h mm	g mm	B mm	kg
KC -50C	300	175	refer to Width	250	According to the flange dimension	21	Flange: JIS 10K/ ANSI 150lb / DIN PN16 stomize
KC -65C	300					22
KC -80C	350					25
KC -100C	350					27

Dimensions Picture：



Materials：

        
          Casing 
          
          Main Meter 
          
          　Cast-Iron (with epoxy painting)/ Stainless Steel, Stainless Steel Top 
          
        
        
          Bypass meter 
          
           　Stainless Steel Outside 
        
        
          Measuring element 
          
           　Plastic 
        
        
           Impeller 
          　Plastic 
        
        
          Spring loaded Valve 
          
           　Plastic, Stainless Steel 
        
            
      
        
        
      
             Order Introduction：

        
            
          Dia. 
          
          Category 
          
          + 
          Hot Type 
          
          + 
          SUS 304 
          
          + 
          SUS 316 
          
          + 
          Flange Spec. 
          
        
        
        
          KC 
          --- 
          C 
          H 
          S1 
          S2 
          --- 
        
            
       
      Ex1: 3”,Hot Type,SS304,JIS10K→  KC-80CHS1JIS10K
Ex2: 3”,Standard Type,JIS10K →  KC-80CJIS10K